The Fireye BurnerPRO is a compact, microprocessor based, primary flame safeguard control system designed to provide the proper burner sequencing, ignition and flame monitoring for on-off, multistage, or modulating burners used in commercial heating and process equipment firing oil and gas fuels. The BurnerPRO flame safeguard offers two built-in amplifiers, which allows for use in UV only, FR only, and UV+FR applications. Flame monitoring for UV is accomplished by using available UV scanners: UV90L, UV1AL & UV5. Flame monitoring for FR version is accomplished by using available ionization rod: 69ND1. The FR amplifier circuitry is subjected to permanent selfchecking, which allows it for use in applications that require burner cycle that runs for more than 24 hours. When operated as a UV control, the system is considered non-permanent, which requires a burner recycle at least once every 24 hours.
The valve proving feature checks for leakage through the safety shutoff valves prior to burner startup or immediately after a burner shutdown. The Modbus interface provides the ability to write custom timing parameters, as well as reading status information during burner operation.
PLEASE CALL FOR PRICING AND DELIVERY!!!
Choose from the following BurnerPRO BP110UVFR-SxMP models:
BP110UVFR-S1MP
BP110UVFR-S2MP
BP110UVFR-S3MP
BP110UVFR-S4MP
BP110UVFR-S5MP
BP110UVFR-S6MP
