, ,

Fireye 85UVF4A-2QDK3WR Phoenix Series 2 Scanner, UV, K3 filter

$3,120.00

Fireye 85UVF4A-2QDK3WR Phoenix Series 2 Scanner, UV with quick disconnect, K3 filter

Backordered: Item typically ships in 5 to 10 days

Fireye 85UVF4A-2QDK3WR Fiber optic version of Phoenix Series 2 Scanner, Selectable FFRT – Ultra-violet, with quick disconnect and K3 filter. Use 59-546-xx cable. For use with EDC1, EDC2, MEDC2, YB110DC or YB230DC direct coupled amplifiers. FM, UL/c Approved. Uses 61-7442 fiber optic assemblies.

The Fireye Phoenix Series 2 type 85UVF/IRF flame scanners are microprocessor based devices utilizing a solid state flame detection sensor. The Phoenix flame scanners incorporate an internal flame relay with automatically set ON/OFF thresholds, thereby eliminating the need for a remote flame amplifier or flame switch. Phoenix scanners detect the amplitude of the modulations (the flame “flicker”) that occur within the targeted flame, over a wide frequency. During the scanner setup procedure, the amplitudes of the target flame are automatically stored by the flame scanner, together with optimum ON/OFF criteria. The appropriate sensor gain is automatically selected. Phoenix scanners incorporate full self-diagnostics and electronic self-checking.

The Phoenix 85UVF/IRF is available in multiple models differentiated by spectral range, levels of hazardous area certifications and agency approvals. The product is powered by 24Vdc. Electrical connection is via an 8-pin electrical quick-disconnect (QD). An analog 4 to 20mA output of flame strength is standard.

 

Documents

Product Datasheet / Manual / Installation Instruction documents are provided below:

Datasheet

 

Weight 6 lbs
Dimensions 11 × 9 × 8 in
Shopping Cart